Quality Engineer
Solliciteren
Plaats
Halle1500
Vlaams-Brabant
België
Contract
Vooltijds, Onbepaalde duurDatum gepubliceerd
2026-02-12Online to:
2026-04-13EUR 15.00 HOUR
Quality Engineer
- Trelleborg Sealing Solutions
- Vlaams-Brabant
- 22 uren geleden
Sista ansökningsdag Plats: MLT - Hal Far
Job Role: To support the function of the quality department through the duties outlined below together with any other tasks as assigned by the Quality Manager.
Duties, Responsibilities And Authorities
Answer customer complaints through 8D report within the requested deadline
Ensure that corrective actions in 8D reports are closed on time and reports updated and submitted accordingly
Support departments with problem solving
Ensure that revised copies of documentation are uploaded in QMS system such that integrity of QMS is maintained.
Use equipment in quality lab in order to investigate parts (including customer returned samples)
Checking of tool approvals and informing relevant BU of the results
Carry out metrological confirmation of equipment as per schedule and procedures
Provide part numbers as requested after going through quotation
Review and confirmation of inspection plans
Carry out MSAs as required
Review new quotation requests in terms of quality requirements, including but not limited to dimensions and tolerances, surface quality, certificate requirements and other general requirements.
Review and approval of drawings
Recognise product safety/special characteristics on drawings and transfer information correctly
Ensure department KPIs are met and propose actions to rectify negative results for continuous improvement where applicable.
Ensure the promotion of customer focus throughout the organisation
Support selection and implementation of appropriate preventive and corrective actions
Has the authority to stop shipment or stop production (where applicable) to correct quality problems
Inform relevant area management team immediately upon complaint notification to prevent possibility of further nonconforming product to be produced and/or shipped to the customer.
Ensure that the Quality Management System (QMS) conforms to the requirements of IATF 16949:2016
Report on the performance of the QMS and opportunities for improvement to management (particularly top management)
Ensure that the integrity of the QMS is maintained when changes to the QMS are planned and implemented
Implement improvements necessary to improve the systems following results of internal and external audits as necessary
Monitor implementation of IATF 16949:2016 across all departments within TSS Malta
Ensure all Environment, Health and Safety instructions are implemented
Ensure safety performance is adequately communicated
Participate in risk reduction plans
Use any customer portals such as: CAQ, process director etc.
Understanding customer requirements and liaising with relevant parties. This includes technical cleanliness for automotive parts.
Compliance with the requirements of the ISO 14001 Environmental Management System and ISO 45001 Occupational Health and Safety Management System.
Responsible for reporting any hazards / near misses / injuries immediately you're aware of to the area management.
Skills/Education:
Bachelor Degree in Engineering (Hons.) or equivalent.
Good use of Microsoft Office tools
Good understanding of statistics, ideally with a Six Sigma Green Belt or Black Belt training background.
Understanding of customer-specific requirements
Understanding of applicable core tools
Technical understanding of manufacturing process as applicable
Understanding of product requirements
Understanding how to operate equipment to test parts to check conformance to product requirement, as applicable.
Excellent verbal and written communication skills in English.
Able to work under own initiative.
Able to prioritize tasks as needed to meet deadlines.
Able to work with different teams and maintain good working relationships both external and internal customers.
Attentive to detail, logical, practical and proactive.
Workplace Culture
At Trelleborg Malta, we believe in creating a vibrant and inclusive workplace where your voice matters. You'll be recognized for your contributions and have plenty of opportunities for growth and development. Join us and be part of a team that supports and celebrates each other
What We Offer
Trelleborg University: Enhance your skills by studying while you work
Career Development: Explore dynamic career paths and learn from our experienced employees.
Comprehensive Health Coverage: Benefit from health insurance for you and your dependents.
Flexible Working Hours: Customize your schedule to achieve work-life balance.
Study Leave: Take advantage of study leave to further your education.
Convenient Parking: Enjoy easy, hassle-free parking facilities.
Social and Well-Being initiatives: Doctor on site, and frequent social activities
Trelleborg is an equal opportunity employer. Join us and experience a rewarding, balanced work environment
Job Role: To support the function of the quality department through the duties outlined below together with any other tasks as assigned by the Quality Manager.
Duties, Responsibilities And Authorities
Answer customer complaints through 8D report within the requested deadline
Ensure that corrective actions in 8D reports are closed on time and reports updated and submitted accordingly
Support departments with problem solving
Ensure that revised copies of documentation are uploaded in QMS system such that integrity of QMS is maintained.
Use equipment in quality lab in order to investigate parts (including customer returned samples)
Checking of tool approvals and informing relevant BU of the results
Carry out metrological confirmation of equipment as per schedule and procedures
Provide part numbers as requested after going through quotation
Review and confirmation of inspection plans
Carry out MSAs as required
Review new quotation requests in terms of quality requirements, including but not limited to dimensions and tolerances, surface quality, certificate requirements and other general requirements.
Review and approval of drawings
Recognise product safety/special characteristics on drawings and transfer information correctly
Ensure department KPIs are met and propose actions to rectify negative results for continuous improvement where applicable.
Ensure the promotion of customer focus throughout the organisation
Support selection and implementation of appropriate preventive and corrective actions
Has the authority to stop shipment or stop production (where applicable) to correct quality problems
Inform relevant area management team immediately upon complaint notification to prevent possibility of further nonconforming product to be produced and/or shipped to the customer.
Ensure that the Quality Management System (QMS) conforms to the requirements of IATF 16949:2016
Report on the performance of the QMS and opportunities for improvement to management (particularly top management)
Ensure that the integrity of the QMS is maintained when changes to the QMS are planned and implemented
Implement improvements necessary to improve the systems following results of internal and external audits as necessary
Monitor implementation of IATF 16949:2016 across all departments within TSS Malta
Ensure all Environment, Health and Safety instructions are implemented
Ensure safety performance is adequately communicated
Participate in risk reduction plans
Use any customer portals such as: CAQ, process director etc.
Understanding customer requirements and liaising with relevant parties. This includes technical cleanliness for automotive parts.
Compliance with the requirements of the ISO 14001 Environmental Management System and ISO 45001 Occupational Health and Safety Management System.
Responsible for reporting any hazards / near misses / injuries immediately you're aware of to the area management.
Skills/Education:
Bachelor Degree in Engineering (Hons.) or equivalent.
Good use of Microsoft Office tools
Good understanding of statistics, ideally with a Six Sigma Green Belt or Black Belt training background.
Understanding of customer-specific requirements
Understanding of applicable core tools
Technical understanding of manufacturing process as applicable
Understanding of product requirements
Understanding how to operate equipment to test parts to check conformance to product requirement, as applicable.
Excellent verbal and written communication skills in English.
Able to work under own initiative.
Able to prioritize tasks as needed to meet deadlines.
Able to work with different teams and maintain good working relationships both external and internal customers.
Attentive to detail, logical, practical and proactive.
Workplace Culture
At Trelleborg Malta, we believe in creating a vibrant and inclusive workplace where your voice matters. You'll be recognized for your contributions and have plenty of opportunities for growth and development. Join us and be part of a team that supports and celebrates each other
What We Offer
Trelleborg University: Enhance your skills by studying while you work
Career Development: Explore dynamic career paths and learn from our experienced employees.
Comprehensive Health Coverage: Benefit from health insurance for you and your dependents.
Flexible Working Hours: Customize your schedule to achieve work-life balance.
Study Leave: Take advantage of study leave to further your education.
Convenient Parking: Enjoy easy, hassle-free parking facilities.
Social and Well-Being initiatives: Doctor on site, and frequent social activities
Trelleborg is an equal opportunity employer. Join us and experience a rewarding, balanced work environment
Meer banen van je zoekopdracht
Data Analyst
- Halle
- 12 februari 2026
Data Analyst
- Halle
- 12 februari 2026
Project Engineer
- Halle
- 12 februari 2026
Project Engineer
- Halle
- 12 februari 2026
Manufacturing Engineer
- Halle
- 12 februari 2026
Manufacturing Engineer
- Halle
- 12 februari 2026
Quality Engineer
- Halle
- 12 februari 2026
Quality Engineer
- Halle
- 12 februari 2026